Office of the Registrar
Campus Address
Hanover, NH
03755-3529
Phone: (603) 646-xxxx
Fax: (603) 646-xxxx
Email: reg@Dartmouth.EDU

Organization, Regulations, and Courses 2024-25


Engineering Sciences - Undergraduate

Chair: Douglas W. Van Citters

Professors A. R. Abramson, M. E. Ackerman, I. Baker, S. Chin, B. Cushman-Roisin, G. Cybenko, E. Fossum, I. Georgakoudi, T. U. Gerngross, K. E. Griswold, G. Hautier, K. Keller, J. Liu, L. R. Lynd, G. P. Parker, K. D. Paulsen, L. R. Ray, E. Santos Jr., R. Sarpeshkar, E. M. Schulson, C. R. Sullivan, S. Taylor, D. Van Citters, X. Zhang; Professors Emeriti J. P. Collier, A. O. Converse, E. Garmire, U. J. Gibson, R. J. Graves, A. Hartov, C. E. Hutchinson, F. E. Kennedy, W. Lotko, D. R. Lynch, V. F. Petrenko, H. J. Richter, B. U. O. Sonnerup, G. B. Wallis; Associate Professors S. G. Diamond, H. Fang, H. J. Frost, , R. J. Halter, W. Li, G. P. Luke, K. Odame, M. Q. Phan, K. S. Samkoe, H. L. Seroussi, J. T. Stauth, V. Vaze; Assistant Professors A. Boys, T. Burgin, M. Fitzpatrick, K. Hixon, J. Lee, Y. Li, W. Marrero Colon, E. Mayfield, C. R. Meyer, E. L. Murnane, H. Nguyen, W. Ouyang, W. J. Scheideler, B. A. Thomas. Senior Lecturers M. R. Albert, E. Bish, P. Bonfert-Taylor, O. Goodenough, P. J. Hoopes, K. Hoyt, K. Kawiaka, E. Korsunskiy, M. S. Laser, R. C. Lasky, D. Macaulay, V. V. May, S. O. Peterson, P. J. Robbie, S. G. Shepherd, M. E. Testorf, J. D. Wilson, C. E. Wyman; Lecturers R. Barry, M. Carpenter, D. C. Cullen, M. D’Andrea, S. C. Davis, X. Fan, C. Hackett, R. Harder, M. A. Kokko, D. Kynor, E. Monroe, U. L. Osterberg, G. Pope, F. Shubitidze, S. A. Snyder, P. T. Staats, E. Truex, R. White, P. P. Yu.

To view Engineering Sciences Undergraduate courses, click here.

To view Engineering Sciences Graduate requirements, click here

To view Engineering Sciences Graduate courses, click here.

 

The undergraduate Engineering Sciences major leads to an A.B. degree. It provides engineering students with a common core of Science and Engineering Sciences courses. Interest in the various branches of engineering is accommodated through electives and usually through additional study leading to a Bachelor of Engineering or higher degree. For those students considering careers in such diverse fields as medicine, management, or law, the Engineering Sciences major enables them to better understand our increasingly technological society.

Students interested in a career in Engineering should plan on completing the Bachelor of Engineering or Master’s program. The Bachelor of Engineering degree program is accredited by the Engineering Accreditation Commission of ABET, 111 Market Place, Suite 1050, Baltimore, MD 21202-4012 - telephone (410) 347-7700; it is equivalent in technical content to the Bachelor of Science degree in Engineering offered at many other universities but is broader in scope.

The graduate degrees are differentiated according to function. For those interested in design, professional practice, and engineering management, the Master of Engineering (MEng.) and Master of Engineering Management (M.E.M.) degrees are offered; for those interested primarily in research, the M.S. and Ph.D. degrees. Additionally a joint M.D./Ph.D. program and M.D./MEng. are offered in conjunction with the Dartmouth Medical School and a joint M.E.M./M.B.A. and MEng./M.B.A. program with the Tuck School of Business. The Thayer School Guide to Programs and Courses should be consulted for detailed information on all programs beyond the AB.

Courses Available To Non-Majors and First-Year Students

Several engineering sciences courses have few or no prerequisites and may be taken by first-year students exploring a potential interest in the major, or by non-majors seeking to broaden their education with the study of technology.  In general these courses are numbered ENGS 1 through 21.

Technology

Most undergraduate courses up to ENGS 86 satisfy the Technology and Applied Sciences distributive requirements (TAS). Some also satisfy the distributive laboratory requirement (TLA). For those students interested in an introduction to technology and applied sciences one of the courses ENGS 1 through ENGS 21 is recommended.

 

Use of NRO (Non-Recording Option) in all Majors or Minors

Unless otherwise prohibited, prerequisites may be taken under the non-recording option. Any course being used to satisfy major or minor requirements beyond the prerequisites, may not be taken under the non-recording option.

Satisfactory Completion of Engineering Majors and Minors

Satisfactory completion of the engineering majors requires a grade point average of 2.0 in the courses suitable for satisfying the major (other than those prerequisite to the major or minor). The same criterion holds for both courses in a modified major and those in a minor.

 

Requirements for the Major

The sequential nature of the Engineering Sciences curriculum, and the possibilities for developing modified majors with other departments require that students plan their study programs well in advance. Assistance in planning programs may be obtained from an engineering faculty advisor.

All first-year students interested in the sciences should take the placement test in mathematics. The prerequisite courses for the Engineering Sciences major are MATH 3, MATH 8, MATH 13, PHYS 13, PHYS 14, plus ENGS 20 and CHEM 5. COSC 1 and COSC 10 can be substituted for ENGS 20. For students prepared for advanced placement in Calculus it is advisable to take the sequence, MATH 8 and MATH 13, or MATH 11.

No more than two transfer courses may be used for credit in the major.

The Engineering Sciences Major requires seven courses from the core program:

  1. ENGS 21, ENGS 22, and ENGS 23 are required.

  2. Two from ENGS 24, ENGS 25, ENGS 26, ENGS 27, and ENGS 28

  3. Two from ENGS 31 or ENGS 32; ENGS 33 or ENGS 34; ENGS 30, ENGS 35 or ENGS 36; or ENGS 37.

Two additional courses are required:

4. One elective in Engineering Science.

5. One elective in Engineering Science, mathematics or a science course.

A Culminating Experience in Engineering Sciences is required. This is typically taken as one of the two electives or may be an additional course. The culminating experience may be: a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Only Engineering Sciences courses numbered above 20 (excluding ENGS 80 and ENGS 87) may be counted as electives in the major.

Students seeking to complete the A.B. and B.E. degrees concurrently should note that ENGS 89 may also be counted toward requirements for the B.E. program.

 

Requirements for the Major in Biomedical Engineering Sciences

The biomedical engineering major is offered to students interested in medical school. Faculty from Thayer School and Dartmouth Medical School jointly advise the research projects.

Prerequisites are MATH 3, MATH 8, MATH 11 or MATH 13, PHYS 13, PHYS 14, CHEM 5-6 or CHEM 11, plus ENGS 20. COSC 1 and COSC 10 can be substituted for ENGS 20.

Unless otherwise prohibited, prerequisites for the major may be taken under the Non-Recording Option though this is discouraged for medical school applications.  Students should consult the pre-health advising program for more information.

The biomedical engineering major consists of five engineering science courses, ENGS 21 and ENGS 22, one additional core course chosen from ENGS 23, ENGS 24, ENGS 25, ENGS 26 ENGS 27, ENGS 28 one gateway course chosen from ENGS 31, ENGS 32, ENGS 33, ENGS 34, ENGS 35 or ENGS 36 and ENGS 56 or one additional course chosen from ENGS 23, ENGS 24, ENGS 25 or ENGS 26; four biology and chemistry courses, two from BIOL 12, BIOL 13, BIOL 14 and CHEM 51/CHEM 52 or CHEM 57/CHEM 58 and one biochemistry or engineering science elective1 chosen from BIOL 40 or CHEM 41, or an engineering science course numbered 23 or above.

Students wishing to pursue the BE degree are advised to choose an Engineering Sciences course as their elective.

A Culminating Experience in Engineering Sciences is required and should be consistent with a student’s career objectives and courses taken. This can be taken as one of the two electives or as an additional course. The culminating experience may be: a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90; or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Dartmouth Medical School offers an opportunity for accomplished biomedical engineering sciences majors to apply for early admission to the Dartmouth Medical School through the Early Assurance Program. For more information, please consult the Thayer website at: http://engineering.dartmouth.edu/undergraduate/ab/biomed-major.html

Requirements for the Engineering Physics Major

The Department of Engineering Sciences and the Department of Physics and Astronomy offer a major in Engineering Physics. This major features a 5/5 split in courses, unlike a modified major which requires six courses from one field and four from the other.

Students interested in a future career in Medical Physics are encouraged to consider the Engineering Physics major.  The Thayer School Guide to Programs and Courses should be consulted for more detailed information. 

The prerequisite courses for the Engineering Physics major are MATH 3, MATH 8, MATH 13, MATH 23; PHYS 13, PHYS 14; CHEM 5; and COSC 1 and COSC 10 or ENGS 20;

The Engineering Physics major is a ten-course program consisting of three Engineering Sciences core courses (ENGS 22, ENGS 23, ENGS 24); three Physics core courses (PHYS 19, PHYS 40, PHYS 43 [Students taking PHYS 15 and PHYS 16 should substitute a third physics elective for PHYS 19]); and four electives, two from each department. Two electives must be selected from the following list: ENGS 25, ENGS 33, ENGS 34; PHYS 50, PHYS 68, PHYS 90; PHYS 73 or ENGS 131; PHYS 66 or ENGS 64 or ENGS 120; PHYS 44 or ENGS 72. The other two electives may be courses from the Engineering Sciences Department (numbered above 20, excluding ENGS 80 and ENGS 87) or courses from the Physics and Astronomy Department which fulfill the straight physics major.

Students wishing to pursue the BE degree are advised to choose an Engineering Sciences course as their elective.

A culminating experience is required in the major which can be taken instead of one of the electives above. It must be one of the following: a project or a thesis, ENGS 86, ENGS 88 or ENGS 895 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list) or PHYS 68, PHYS 72, PHYS 73, PHYS 74, PHYS 76, PHYS 82, PHYS 87.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

For more information contact Professor Kristina Lynch (Physics and Astronomy) or Professor Jifeng Liu (Engineering Sciences).

     

Modified Majors

Diverse interests of students have, in the past, led to the construction of Engineering Sciences majors modified by courses in biology, chemistry, mathematics, computer sciences, physics, art, or environmental studies.

The following specific modified majors have been established.

Modified major with Biology: Students interested in engineering and biology may elect a modified major with biology. This modified major must include:

  1. as prerequisites: MATH 3, MATH 8, and MATH 13; PHYS 13 and PHYS 14; CHEM 5 or CHEM 11, ENGS 20, and BIOL 12;

  2. for the Engineering Sciences portion: ENGS 22, ENGS 25 and ENGS 35 plus three courses elected from ENGS 21, ENGS 23, ENGS 24, ENGS 26, ENGS 33, ENGS 34, ENGS 36, ENGS 37, ENGS 52, ENGS 56, ENGS 58, ENGS 91, ENGS 161, ENGS 162, ENGS 165 (ENGS 91, ENGS 161 and 165 also satisfy the culminating experience requirement, see below);

  3. for the biology portion: BIOL 13, plus three courses elected from BIOL 37, BIOL 42, BIOL 43, BIOL 45, BIOL 46, BIOL 71 or CHEM 51 or CHEM 57.

  4. the modified major must also include a culminating experience, which may be a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 90 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. (Consult the Engineering Sciences Department for the most recent list.)

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Students interested in the modified major with Biology should contact Professor Lynd.

Modified major with Chemistry: Students interested in engineering and chemistry may elect a modified major with chemistry. The major enables students to design programs of study that reflect the diversity of their interests. It requires a core of three engineering courses, provides a broad yet relevant set of engineering electives, requires a two-course chemistry core, and is completed with two chemistry electives. This modified major must include:

  1. as prerequisites: MATH 3, MATH 8, and MATH 13; PHYS 13 and PHYS 14; CHEM 5/ CHEM 6 or CHEM 10; ENGS 20;

  2. for the Engineering Sciences portion: ENGS 22, ENGS 25 and 36 plus three courses elected from the following: ENGS 21, ENGS 23, ENGS 24, ENGS 26, ENGS 33, ENGS 34, ENGS 35, ENGS 37, ENGS 52, ENGS 91, ENGS 156, ENGS 158 (ENGS 91, ENGS 156 and ENGS 158 also satisfy the culminating experience requirement, see below.) Not more than two from ENGS 21, ENGS 35 and ENGS 37 may be counted toward the major.

  3. for the Chemistry portion: CHEM 51 or CHEM 57 and CHEM 75 plus two courses elected from CHEM 41, CHEM 52 or CHEM 58, CHEM 63, CHEM 64, CHEM 67, CHEM 76.

  4. the modified major must also include a culminating experience, which may be a project or a thesis, ENGS 86, ENGS 88 or ENGS 896 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Students interested in the modified major with Chemistry should contact Professor Lynd.

Modified Major with Computer Science: For those students interested in computer engineering, a major in engineering sciences modified with computer science is recommended. Such a modified major must include:

  1. as prerequisites: MATH 3, MATH 8, MATH 13; COSC 1 and COSC 10; PHYS 13 and PHYS 14; and CHEM 5.

  2. for the modified major required courses include: ENGS 22, ENGS 27, ENGS 31, COSC 50, plus ENGS 23 or ENGS 24.

  3. for the modified major, breadth options include: a total of five courses from Groups A, B, and C with at least one course from each of the groups and three of the courses must be Computer Science courses; Group A includes ENGS 32, ENGS 62, COSC 51; Group B includes ENGS 26, ENGS 68, ENGS 92 (ENGS 92 also satisfies the culminating experience requirement, see below), COSC 60; Group C includes ENGS 91, COSC 31, COSC 77, COSC 58.

  4. the modified major must also include a culminating experience, which may be a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Students interested in the modified major with Computer Science should contact Professors Santos or Taylor.

Modified Major with Earth Sciences : For those students interested in earth sciences, a major in engineering sciences modified with earth sciences is recommended. Such a modified major must include:

  1. as prerequisites: MATH 3, MATH 8, and MATH 13; PHYS 13 and PHYS 14; CHEM 5, ENGS 20, one introductory Earth Sciences course (EARS 1-9 exclusive of EARS 7) plus EARS 40;

  2. for the Engineering Sciences portion: ENGS 22, ENGS 23, ENGS 24 and ENGS 25 plus two engineering sciences electives, numbered above 20 (except ENGS 80 and 87);

  3. for the Earth Sciences portion: Four Earth Sciences courses, numbered 10 or above, at least one of which must be a Core Methods and Concepts course (Earth Sciences 30-59) and at least one of which must be a Quantitative Analysis or Advanced Topics course (Earth Sciences 60-79).

  4. the modified major must also include a culminating experience, which may be a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Students interested in the modified major with Earth Sciences should contact Professor Schulson.

Modified Major with Environmental Sciences: A modified major has been established to permit interdisciplinary study in environmental sciences. Effective preparation for graduate study or professional activity in the environmental sciences requires an assimilation of material traditionally encountered in biology, chemistry, ecology, and earth sciences, as well as in engineering sciences. This modified major must include:

  1. as prerequisites: MATH 3, MATH 8, and MATH 13; PHYS 13 and PHYS 14; CHEM 5 or CHEM 10; and ENGS 20; at least one additional prerequisite from BIOL, CHEM, or EARS as appropriate for the environmental sciences electives below.

  2. for the Engineering Sciences portion: ENGS 22, ENGS 25, ENGS 37 and three of the following: ENGS 27, ENGS 34, ENGS 35, ENGS 36, ENGS 41, ENGS 43, ENGS 44, ENGS 52, ENGS 171, ENGS 172, with at least two courses from among ENGS 41, ENGS 43, ENGS 44, ENGS 45.

  3. for the Environmental Sciences portion: four courses from the following list, with at least two courses from one department. BIOL 21 or 51, BIOL 26, BIOL 27 or BIOL 68, BIOL 22, 25, 53; CHEM 51, CHEM 63; EARS 16, EARS 35, EARS 66, EARS 67,EARS 71, EARS 72, EARS 77, EARS 78; ENVS 12, ENVS 15, ENVS 20, ENVS 25, ENVS 30. Additional requirements: CHEM 51 is permitted only as a prerequisite to CHEM 63.

  4. the modified major must also include a culminating experience, which may be a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Students interested in the modified major with Environmental Sciences should contact Professor Cushman-Roisin.

Modified major with Public Policy: Students interested in technology and public policy may want to consider an engineering major modified with public policy. This modified major must include:

  1. as prerequisites: MATH 3, MATH 8 and MATH 13; PHYS 13 and PHYS 14; ENGS 20 or COSC 1 and COSC 10; CHEM 5; a course in statistical data analysis, such as ECON 10, SOCY 10, or MATH 10.

  2. for the Engineering Sciences portion: ENGS 21 and ENGS 22, plus one course selected from ENGS 23-ENGS 28, one course selected from ENGS 30-37, one course selected from ENGS 41, ENGS 43, ENGS 44, ENGS 51, ENGS 52, ENGS 56 and one Engineering Sciences course numbered above 20.

  3. for the Public Policy portion: PBPL 5, plus at least one Public Policy methods course, such as: PBPL 40-48 or ECON 20, and at least one course from a policy track. These are typically mid-level courses in Public Policy or related departments, and cannot include Engineering Sciences courses. Possible tracks include: Environment and Public Policy; Health and Public Policy; Natural resources and Public Policy; and Science/technology and Public Policy. The Rockefeller Center maintains a list of suggested offerings in these areas.

  4. the modified major must also include a culminating experience, which may be a project or a thesis, ENGS 86, 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Students interested in the modified major with Public Policy should contact Dean and Professor Abramson.

Modified major with Studio Art: Students interested in architecture or product design may want to consider an engineering major modified with studio art. This modified major must include:

  1. as prerequisites: MATH 3, MATH 8, and MATH 13; PHYS 13 and PHYS 14; plus ENGS 20 and CHEM 5;

  2. for the engineering science portion: ENGS 21, ENGS 22, ENGS 24 and ENGS 33, plus two courses elected from any Engineering Sciences course available for AB credit in the major (ENGS 76 or a graduate level elective also satisfy the culminating experience requirement, see below);

  3. for the studio art portion: SART 15 and SART 16, plus two upper level studio art courses.

  4. the modified major must also include a culminating experience, which may be a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Students interested in the modified major with Studio Art should contact Professor Robbie.

Requirements for a Modified major with Engineering Sciences as the Primary Department

Prerequisites are MATH 3, MATH 8, MATH 13, PHYS 13, PHYS 14, plus ENGS 20 and CHEM 5. COSC 1 and COSC 10 can be substituted for ENGS 20. For students prepared for advanced placement in Calculus it is advisable to take the sequence, MATH 8 and MATH 13, or MATH 11.

  1. ENGS 21, and ENGS 22, are required.

  2. One from ENGS 24, ENGS 25, ENGS 26, ENGS 27, and ENGS 28

  3. One from ENGS 30, ENGS 31, ENGS 32, ENGS 33, ENGS 34, ENGS 35, ENGS 36; or ENGS 37.

  4. One elective in Engineering Science numbered above 20 (excluding ENGS 80 and ENGS 87

  5. And a Culminating Experience

A Culminating Experience in Engineering Sciences is required. This is typically taken as one of the two electives or may be an additional course. The culminating experience may be: a project or a thesis, ENGS 86, ENGS 88 or ENGS 89 (ENGS 89 must be taken as part of the two-course design sequence ENGS 89/ ENGS 90); or an advanced engineering sciences course with a significant design or research project, normally taken in the senior year, chosen from an approved list. Consult the Engineering Sciences Department for the most recent list.

Prior to enrollment in ENGS 89, at least six engineering sciences courses must be completed; ENGS 21 plus five additional courses numbered 22 to 76 and 91 and above.

Requirements for Another Major Modified with Engineering Sciences

Prerequisites are MATH 3 and MATH 8, and PHYS 13 or PHYS 3 and PHYS 4*. The required courses are four Engineering Sciences courses numbered above 20 (excluding ENGS 87), to include ENGS 21 and should be coherent with the student's  major field of study and approved, upon petition, by the Chair of Engineering Sciences. Students should note that many Engineering Sciences courses require prerequisites in addition to MATH 8 and PHYS 13. No engineering sciences courses 20 and above may be taken under the Non-Recording Option.

*Must have been taken at Dartmouth, no AP credit is permitted.

All modified Engineering Sciences majors must be approved by the Chair of the Engineering Sciences Department.

Requirements for the Minor in Engineering Sciences

Prerequisites are MATH 3, MATH 8 and MATH 13, and PHYS 13 and PHYS 14. The required courses are ENGS 20, ENGS 21, ENGS 22 and two Engineering Sciences undergraduate courses numbered above 20 (excluding ENGS 80 and ENGS 87). Students should note that some Engineering Sciences courses require prerequisites in addition to those noted. No courses beyond the prerequisites may be taken under the Non-Recording Option. No course may be used for both a major and a minor (although a course may be part of one of these and prerequisite to the other, or prerequisite to both).

 

Requirements for the Minor in Materials Science

The minor in Materials Science is sponsored by faculty in Chemistry, Physics and Engineering with an interest in interdisciplinary education and research in materials science. 

  1. As prerequisites: PHYS 13 and PHYS 14; CHEM 5 or CHEM 11,

  2. ENGS 24 is required

  3. One from PHYS 76 or ENGS 133

  4. Two from:

    1. Group A ENGS 131 or PHYS 73

    2. Group B CHEM 96.04 or CHEM 96.06

    3. Group C ENGS 73, ENGS 132, or PHYS 43

*If ENGS 133 is taken as part of the requirement for the courses under Methods, you must choose at least one elective from outside the Engineering Sciences Department.

No course may be used for both a major and a minor (although a course may be part of one of these and prerequisite to the other, or prerequisite to both).

Requirements for the Minor in Human-Centered Design

The minor in human-centered design in Engineering Sciences is an interdisciplinary program comprising six courses, two from each section below (1, 2, 3):

Prerequisites: MATH 3

Design Foundation Prerequisites: ENGS 12 and ENGS 21

2. *Ethnographic Methods and Human Factors /Psychology*:ANTH 3, ANTH 18, ENGS 15.07, GEOG 11, PSYC 22, PSYC 23, PSYC 28, PSYC 38, PSYC 43, PSYC 50.02, PSYC 53.10, PSYC 53.12, PSYC 53.13, SOCY 11

3. Design Electives: ENGS 15.01, ENGS 15.02, ENGS 18, ENGS 19.01, ENGS 44, ENGS 75, COSC 23.01, COSC 25.01, COSC 25.02, COSC 28, COSC 29.04, FILM 51, PBPL 43, SART 65, SART 66, SART 68

Before taking courses in section 3, it is recommended that students complete both courses in section 1 plus at least one course from section 2. 

No course may be used for both a major and a minor (although a course may be part of one of these and prerequisite to the other, or prerequisite to both).

For Engineering majors: Only ENGS courses numbered below 20 may be counted towards the minor.

For advice contact the Faculty Advisor for the minor, Peter Robbie.

*One of the two courses in Section 2 must be outside of the student's major.

Requirements for Any Major Modified with Human-Centered Design

Any major may be modified with the minor in Human-Centered Design. The HCD minor portion of the modification requires three (3) prerequisites plus a total of four (4) courses selected from course electives in Section 2 and Section 3, with at least one (1) course from each section.**

1. Prerequisites: MATH 3, ENGS 12 and ENGS 21

2. Ethnographic Methods and Human Factors/Psychology:ANTH 3, ANTH 18, ENGS 15.07, GEOG 11, PSYC 22, PSYC 23, PSYC 28, PSYC 38, PSYC 43, PSYC 50.02., PSYC 53.10, PSYC 53.12, PSYC 53.13, SOCY 11    

3. Design Electives:ENGS 15.01, ENGS 15.02, ENGS 18, ENGS 19.01, ENGS 44, COSC 23.01, COSC 25.01, COSC 25.02, COSC 28, COSC 29.04, FILM 51, PBPL 43, SART 65, SART 68.

Students wishing to modify their major with HCD should discuss their plans with their major advisor as well as the Faculty Advisor for the minor, Peter Robbie. Formal proposals for modification require approval of both the major department as well as Engineering Sciences Department Chair, Douglas Van Citters.

 **Due to the potential overlap between the HCD courses and existing majors, there is potential for creating a program of study that does not add significant value beyond a straight major.  Students pursuing the modification should note that 1) there should be a strong intellectual rationale, 2) the proposed plan should be adding something new and significant that is not possible with the straight major, and 3) there should not be significant overlap in courses between the modifier and the primary field of the major.

Honors in the Major  

During their junior or senior year, students may apply for admission to the Honors Program in Engineering Sciences. The application must be filed no earlier than the second week of the fall term in the junior year and no later than the second week of the winter term in the senior year. Contact the Chair of the Engineering Sciences Department for details. Admission to the Honors Program may be granted to those students who have attained an overall grade point average of 3.0, and a grade point average of 3.33 in the major.

The main requirement of the Honors Program is the completion of an honors project. The project, a creative activity suitable to the major subject, is not restricted to experimental work but can equally take the form of a theoretical investigation. Much of the development of the honors project will normally take place within the framework of ENGS 88, the Honors Thesis. (ENGS 88 also fulfills the requirement for a culminating experience in the major.) Upon completion of the project, the student will submit a written thesis and give an oral presentation. Those students who satisfactorily complete the Honors Program with a ‘B+’ average or better and have a grade point average of 3.3 or higher in the major at the time of graduation, will earn Honors recognition in the major. High Honors will be granted to those students who, in addition, have taken two engineering science courses beyond those required for the major (excluding courses under ENGS 20 and ENGS 87), have attained a grade point average of 3.50 in all engineering courses, and have completed outstanding independent work. A vote of the Department is also required prior to awarding High Honors. Students may begin their project the previous term by enrolling in ENGS 87, Undergraduate Investigations. An interim evaluation of honors students will be made after one term and continuation will be recommended for those students whose work demonstrates the capacity for satisfactory (B+) work. Students who satisfactorily complete the Honors Program will have entered on their permanent record Honors in Engineering Sciences, or High Honors in Engineering Sciences.

Advanced Standing in Thayer School Graduate Programs

Many students majoring in engineering sciences enter Dartmouth College with course credits, proficiencies, or both, in a number of subjects resulting from exceptional preparation in high school. As a result, these students have increased elective freedom in choosing courses to satisfy their A.B. requirements.

The 100- and 200-level Engineering and Engineering Sciences courses described in this catalog can be used to satisfy the A.B. degree requirements.

Election of 100- and 200-level Engineering and Engineering Sciences courses in excess of the undergraduate requirements for the major and for admission to any of Thayer’s post-A.B. programs will permit a student to be admitted to the Thayer School with advanced standing. Depending upon the number of elective opportunities, significant reduction in the time required to complete Thayer School’s graduate degree programs is possible.

To take full advantage of this opportunity students are urged, as early as possible after declaring their major, to consult with their Thayer School faculty adviser. Additional details are contained in the Thayer School Catalog.

Requirements for the Bachelor of Engineering Degree (B.E.)

The Bachelor of Engineering (B.E.) program is a professional engineering program accredited by the Engineering Accreditation Commission of ABET, 111 Market Place, Suite 1050, Baltimore, MD 21202, Telephone: (410) 347-7700.

Consult the 2024-2025 Thayer School Guide to Programs and Courses for details on the requirements for the Bachelor of Engineering degree, as well as Master's degree programs.